Boats are costly, and while they allow for quick escapes in summer and midnight parties on the waves, the cost for maintaining and purchasing one is high. Using boats in competitions and speed races also mean that there is wear and tear in the exterior to consider more frequently. When you buy a boat, the color of the boat may seem irrelevant; however, as they continue to use it, there is a need to keep up with the usage and repaint it. To save more money and shave down the bills, DIY favoring sailors visit the world wide web. There is no right way to paint a boat; you can still explore your options and wind up with an awesome-looking boat.
The Cheapest Solutions
One of the million dollar questions asked about painting a boat is if you should use a brush, roller or spray. Each of the options has different results and different techniques. Painting a boat by spraying it is considered to be the hardest out of the three and the most time-consuming, whereas using a brush on the boat’s surface leaving a ton of brush-strokes which combats against the boat’s smooth surface. The roller is as equally as bad; it can also sometimes leave marks that you do not wish to appear. But, an alternative to the situation is to use a brush/roller technique. Use a roller to paint the boat and then top it off with the brush to smoothen any bumps or tracks. This is considered to be the simplest and inexpensive way of painting your boat.
Paint Brand and Quality
The choice of the paint brand doesn’t necessarily affect the boat’s surface or quality, but it is always good to check the flow and mixing requirement before buying a tin of paint. Majority of the paints that are available at paint stores are usually designed for spraying, and it is suggested that you do not brush or roll paint that is designed for spray. When checking for types of paint to use, it is advised that you check for the smallest details and variations in the paint, as they will change the way that your boat works and the quality of the aesthetics.
Getting Ready to Paint Your Boat
Preparation is everything. It is essential that your prep work is spot on, as one small error may result in the paint not sticking. Before painting, ensure that the old coat of gel or polish has been cleaned and prepared for the new paint. Another requirement is that the surface of the boat must be cleaned thoroughly, and relieved of any stains or scratches, as these will be seen clearly through the paint/gloss coat. Ensuring that you sand the surface of the painted areas before applying the final coat is crucial, as you wouldn’t want any build-ups or rough areas. After using the primer, the final gloss of coating and after sanding the boat, you are left with a boat that could sell for double or triple its price. Overall the cost of the paints and brushes would be an estimated amount of $600, but that depends entirely on the brand of paint and brushes that you used.